3D Printer Ultimaker 2+UM2 Olsson Block Kit Interchangeable Nozzle 1.75mm filamt
Clogged 3D printer accessories parts kits 3.0mm filament nozzle backed-up bundle 3D nozzles restore jammed clogged poor print quality solution
3D Printer Ultimaker 2+UM2 Extended + Olsson Block Kit For 3mm Filament E3D Olsson Block Hotend Interchangeable Nozzle
This Olsson Block hotend kit is improved for Ultimaker 2. The
nozzle and heat block are two seperate pieces. You can easily change the
nozzle size. Previously you had to change the entire block.
Filament size use:1.75mm
Nozzles: 1 each 0.25mm + 0.4mm + 0.6mm + 0.8mm
Nozzle Cleaners:2 each 0.25mm + 0.4mm
1 each 0.6mm + 0.8mm
Every print nozzle will clog from time to time. This can cause minor flaws in the print or completely shut down the printing process. There are two solutions when this happens. One, replace the nozzle and spend more money. Two, clear the nozzle and get back to printing high quality prints. This kit comes with two nozzle cleaners for each size nozzle.
We send two nozzle cleaners in case one breaks during the cleaning process. The bits are brittle by nature if side pressure is applied. If used correctly on a heated nozzle, the bits will slide in easily and pull out any clogs in the nozzle. The spiral of the bits helps to clear the nozzle on the way out. Repeat the process 2-3 times to make sure your nozzle is back to printing perfection.
Item Specifics | |
Brand | daewon industries |
Compatible Model | For Ultimaker 2+ |
Country/Region of Manufacture | China |
Model | Ultimakeriinozzbits |
MPN | Does Not Apply |
Type | Cleaning Kit |
UPC | Does Not Apply |
To Fit | 3d Printer |